EHD Manual - JS Woodhouse

26Trouble Shooting GuideSymptom:Symptom:Bales are bunching up at kick-off and not going over the side smoothly.Bales fall off conveyor before reaching the kick-off.Problem:Elevator is not loading bale onto conveyor properly.Illustration AIllustration BWrongRight(End View)(End View)SOLUTION:Use the accessories shown below.Connector plates: Connects incline elevatorto horizontal mow conveyor. Prevents bales fromturning and tumbling out when transferring.Above drawing illustrates incline elevator assembledto horizontal conveyor, using Bale Guides (modelHST-7A), Connector Plates (model HST-17A or 18A)and Bale Arrangers (model HST-16A).Bale arrangers: Directs irregular shaped balesinto horizontal conveyor. Made of heavy galvanizedsteel.Bale guidesKeeps bale twine fromcatching and breaking when bales are dischargingfrom a steeply inclined elevator. Prevents balesfrom tipping and turning and then tumbling outwhen transferring from an inclined elevator to mowconveyor. Pair of sturdy steel tubes clamp ontosides of inclined elevator on top end.SOLUTION: Continued on page 2711160412170