EHD Manual - JS Woodhouse

See pages 12 and 13 for Electric Motor and Horsepower requirements.43Bolt electric motor onto motor mount arms #21 using 5/16" x 1" bolts #22 , 5/16" flatwashers #14 , 5/16" lockwashers#6 and 5/16" nuts #7 . Install electric motor and motor mount arms onto motor mount cross pipe using the AX43 or4L45 belts #24 . It is important that the motor be hung exactly as shown below in order to utilize weight of motor to keepbelt snug and to assure proper fitting of shield. Tighten motor mount arm setscrews onto motor mount cross pipe (Seeillustration below).Illustration NSafety shield removed for display purposes onlyMotor Mount ArmSet ScrewPeep HoleLook through peep hole (under motor mount pipe) in lower shield, and determine the belt is in line. Also check that belt issnugged up but not overtightened. OVERTIGHTENED BELTS WILL CAUSE BEARING AND PULLEY FAILURE.See pages 12 and 13 for Electric Motor and Horsepower requirements.11160412170