EHD Manual - JS Woodhouse

More documents

Recommendations

Info

4Operator Qualifications and Sign Off SheetOperation of this machine shall be limited to competent and experienced persons. In addition, anyone whowill operate or work around this machine must use good common sense. In order to be qualified, he mustalso know and meet all other requirements, such as:1. Some regulations specify that no one under the age of 18 may operatepower machinery. This includes this machine. It is your responsibility toknow what these regulations are in your own area or situation.2. Current OSHA regulations state in part: “At the time of initial assignmentand at least annually thereafter, the employer shall instruct every employeein safe operation and servicing of all equipment with which theemployee is, or will be involved” (per Federal Occupational Safety andHealth Standards for Agriculture Subpart D, Section 1928.57 (a) (6))3. Complete sign off sheet below to document training.4. A person who has not read and understood all operating and safetyinstructions, is not qualified to operate this machine.5. It is the responsibility of the owner, qualified operator/s or supervisor/s tosee that no unqualified persons are allowed to operate this machine andthat unqualified persons (especially children) stay out of the work area.CAUTIONAs a requirement of OSHA, it is necessary for the employer to train the employee in the safe operation and servicing of thismachine at the time of initial assignment and at least annually thereafter. Use this sign off sheet to document training.Date Employer Signature Employee Signature11160412170
Maximum Angle of Elevationfor Various Bale Lengths5BaleLengthMaximumElevation Angle20" 30º24" 35º30" 40º36" 45ºGot a Question?If any items covered in this manual are not fully understood by you, contactyour dealer or T. R. Metal Crafters, Inc.; 312 E. Industrial Dr.; P.O. Box 248;Loyal, WI 54446 (call Toll Free 1-800-842-5349 for assistance).01010812170
Page 1 and 2: WARNINGEHDExtra-Heavy-Duty Bale Ele
Page 3 and 4: 1ForewordThis Manual is intended to
Page 5: The Decals Shown On This Page Must
Page 9 and 10: Machine Inspection7Winch and CableW
Page 11 and 12: Movement and Placement9RightWrongLo
Page 13 and 14: Movement and Placement11MinimumDist
Page 15 and 16: New Lockout/Tagout Rule Becomes Eff
Page 17 and 18: 15Work Area Diagram - Movement and
Page 19 and 20: 17THIS PAGE LEFTINTENTIONALLYBLANK1
Page 21 and 22: Bale Kick-off Operation and Assembl
Page 23 and 24: Optional Accessories21Connector pla
Page 25 and 26: Trouble Shooting Guide23Symptom:Pro
Page 27 and 28: Trouble Shooting Guide25Symptom:Pro
Page 29 and 30: Trouble Shooting Guide27SOLUTION:Po
Page 32 and 33: 30OPERATING HEIGHTS & GENERAL DIMEN
Page 34 and 35: 32LAYOUT GUIDEBALE HANDLING SYSTEMS
Page 36 and 37: 34HAY CONVEYOR (Model EHD) - Parts
Page 38 and 39: 36Owner’sandOperator’sManualIll
Page 40 and 41: 38THIS PAGE LEFTINTENTIONALLYBLANK1
Page 42 and 43: 40Located idler shaft #39 , 3/8" nu
Page 44 and 45: 42Install lower shield #37 onto the
Page 46 and 47: 44Install shield cover #33 onto ele
Page 48 and 49: PLACEFIRST CLASSPOSTAGEHERET. R. Me
Page 50: WARNINGRead and Understand this man

EHD Manual - JS Woodhouse

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?