Altivar 58 Telemecanique - error

Configurable I/O Application FunctionsAnalog input application functionsPreset setpoints:2 or 4 preset setpoints require the use of 1 or 2 logic inputs respectively:2 preset setpoints 4 preset setpointsAssign: LIx to Pr2Assign: LIx to Pr2 then, LIy to Pr4LIx Reference LIy LIx Reference0 Analog reference 0 0 Analog reference1 Process max (= 10 V) 0 1 PI2 (adjustable)1 0 PI3 (adjustable)1 1 Process max (= 10 V)ENGLISHTorque limit : (Only with an I/O extension card with analog input AI3)The signal applied at AI3 operates in a linear fashion on the internal torque limit (parameter TLI in the "drivemenu") :- If AI3 = 0V : limit = TLI x 0 = 0- If AI3 = 10 V : limit = TLI.Applications : Torque or traction correction, etc.Encoder input application functions :(Only with an I/O extension card with encoder input)Speed regulation : Is used for speed correction using an incremental encoder or sensor.(See documentation supplied with the card).Summing speed reference : The setpoint from the encoder input is summed with AI1. (See documentationsupplied with the card)Applications :- Synchronization of the speed of a number of speed controllers. Parameter PLS in the "drive" menu isused to adjust the speed ratio of one motor in relation to that of another.- Setpoint via encoder.100