TRC101 300-1000 MHz Transceiver - RF Monolithics, Inc.

More documents

Recommendations

Info

5. Maximum RatingsAbsolute Maximum RatingsSymbol Parameter Notes Min Max UnitsVDD Positive supply voltage -0.5 6 VVin Voltage on any pin (except RF_P and RF_N) -0.5 Vdd+0.5 VVoc Voltage on open collector outputs (RF1, RF2) 1 -0.5 Vdd+1.5 VIin Input current into any pin except VDD and VSS -25 25 mAESD Electrostatic discharge with human body model 1000 VTstg Storage temperature -55 125 °CTlead Lead temperature (soldering, max 10 s) 260 °CNote 1: At maximum, VDD+1.5 V cannot be higher than 7 V.Recommended Operation RatingsSymbol Parameter Notes Min Max UnitsVDD Positive supply voltage 2.2 5.4 VVDCRF DC voltage on open collector outputs (RF1, RF2) 1,2 Vdd-1.5 Vdd+1.5 VAC peak voltage on open collector outputs (RF1,1 Vdd-1.5 Vdd+1.5 VVACRF RF2)Top Ambient operating temperature -40 85 °CNote 1: At minimum, VDD - 1.5 V cannot be lower than 1.2 V.Note 2: At maximum, VDD+1.5 V cannot be higher than 5.5 V.6. DC Electrical Characteristics(Min/max values are valid over the recommended operating range Vdd = 2.2-5.4V. Typical conditions: Top = 27°C; Vdd = 3.0 V)Digital I/O Sym NotesLimitValuesParameter min typ maxUnitTest Conditions20 22 315MHz BandSupply current (TX mode, Pout = Pmax) Idd_TX21 25 433MHz BandmA22 26 868MHz Band24 28916MHz Band15 315MHz BandSupply current (TX mode, Pout = 0 dBm,16 433MHz BandIdd_TX0mA50Ω Load)22 868MHz Band24916MHz Band8.5 13 315MHz BandSupply current (RX mode)Idd_RX8.5 14 433MHz BandmA9.5 15 868MHz Band11 17916MHz BandSleep current IS 0.25 µA All blocks disabledIdle current IIDLE 3 3.5 mAOscillator and basebandenabledLow battery voltage detector currentconsumptionIVD 0.5 µAWake-up timer current consumption IWUT 1.5 µALow battery detect threshold Vlb 2.2 5.3 VProgrammable in 0.1 VstepsLow battery detection accuracy ±75 mVAnalog RSSI Output Level RSSIL 300 1000 mV -50dBm>RFin>-115dBmDigital input low level Vil 0.3*Vdd VDigital input high level Vih 0.7*Vdd VDigital input current low Iil -1 1 µA Vil = 0 VDigital input current high Iih -1 1 µA Vih = Vdd, Vdd = 5.4 VDigital output low level Vol 0.4 V Iol = 2 mADigital output high level Voh Vdd-0.4 V Ioh = -2 mADigital input capacitance 2 pFwww.RFM.com Email: info@rfm.com Page 32 of 42©by RF Monolithics, Inc. TRC101 - 4/8/08
Digital output rise/fall time 10 ns Load = 15 pFwww.RFM.com Email: info@rfm.com Page 33 of 42©by RF Monolithics, Inc. TRC101 - 4/8/08
Page 1 and 2: TRC101300-1000 MHzTransceiverCompli
Page 3 and 4: 1. Pin Configuration1.1 Pin Descrip
Page 5 and 6: 916 MHz 2.2e-3 - j1.55e-2 9 + j63 1
Page 7 and 8: 3. TRC101 Functional Characteristic
Page 9 and 10: The FIFO can be read out through th
Page 11 and 12: OOK/ASK SignalingThe RSSI may be us
Page 13 and 14: 4. Control and Configuration Regist
Page 15 and 16: Figure 4. Status Read Timingwww.RFM
Page 17 and 18: Automatic Frequency Adjust Register
Page 19 and 20: Transmit Configuration Register [PO
Page 21 and 22: Frequency Setting Register [POR=A68
Page 23 and 24: Receiver Control Register (continue
Page 25 and 26: FIFO Read Register [POR=B000h]Bit B
Page 27 and 28: Data Rate Setup Register [POR=C623h
Page 29 and 30: Wake-up Timer Period Register [POR=
Page 31: Battery Detect Threshold and Clock
Page 35 and 36: AC Electrical Characteristics - con
Page 37 and 38: 8. Receiver Measurement ResultsThe
Page 39 and 40: 9. Transmitter Measurement ResultsT
Page 41 and 42: IPC/JEDEC J-STD-020C REFLOW PROFILE

TRC101 300-1000 MHz Transceiver - RF Monolithics, Inc.

Create successful ePaper yourself

Delete template?

Save as template?