VCI07 - Duncan Rogers

More documents

Recommendations

Info

3.2 Menu structure – quick referenceBasic menuDate & timeReady to startStandbyStartingOnLoadOFFloadedStopping ( soft stop )Blowing downWarning and alarmsHigh pressureHigh temperatureAir filter blockedReversed phasesMotor overloadMotor over temperatureFan motor overloadPower failureetc.Error log menuTimer menuBasic settingsSettings menuLogged error Nr. 1: error type + date & timeLogged error Nr. 2: error type + date & timeLogged error Nr. 3: error type + date & timeLogged error Nr. 4: error type + date & timeLogged error Nr. 5: error type + date & timeLogged error Nr. 6: error type + date & timeLogged error Nr. 7: error type + date & timeLogged error Nr. 8: error type + date & timeLogged error Nr. 9: error type + date & timeLogged error Nr. 10: error type + date & timeRunn. hrsLoad hrsRemaining hours to air filter changeRemaining hours to oil filter changeRemaining hours to oil separator serviceRemaining hours to oil changeGrease motorPressure unload levelPressure load levelPressure time programming ON / OFFPressure time settingsCurrent time & date set-upDrain spit time : sec. Date 1+time+pressure 1Drain dwell time : sec. Date 1+time+pressure 2Dr. alarm 5 °C – 30 °C Date 1+time+pressure 3Dryer start 0 – 15 min Date 1+time+pressure 4etc. ( up to 32 )Accessible only for aftersales and factorysettingsNote: Dr. alarm and Dryer Start are visible if the drier option is enabled in the factory or in the SAV menu.09/04 Worthington-CreyssensacPage 6 62 205 930 11
3.3 Menus and changeable features3.3.1 Status menuThe status menu can be considered as the default menu. It is shown at start-up of the controller and the <strong>VCI07</strong>will revert to this menu after one minute when the keyboard activity stops while displaying a different menu. Thefollowing messages are displayed :• Machine status (e.g. standby, blowing down, onload, offload, etc.)• Time and day• Errors - active faults are blinking (e.g. air. Temp ----, Oil filt P warn, etc.)3.3.2 Error log menuThe <strong>VCI07</strong> saves the 10 most recent occurred faults. By using the up and down arrow-button all the messagescan de displayed. Below an example is given:Display messageFault log nr. 1High pressure faultFault log nr. 2Emergency stopFault log nr. 3Air filter P warningFault log nr. 4Temperature probe faultEtc.MeaningOccurred fault number 1 is being displayedOccurred fault number 2 is being displayedOccurred fault number 3 is being displayedOccurred fault number 4 is being displayed(See Table 1 on page 3)Table 4After a fault has been selected and the enter-button is pushed continuously, the date and time is displayed whenthe fault occurred.3.3.3 Maintenance interval menuIn the timer menu the following timers can be checked:ParameterMeaningRunning hoursTotal running hours is being displayedLoaded hoursTotal loaded hours is being displayedAir filter timeRemaining hours to air filter service is being displayedOil filter timeRemaining hours to oil filter service is being displayedOil separator time Remaining hours to oil separator service is being displayedOil change timeRemaining hours to oil change is being displayedLubricationMotor lubricationNote: Setting and resetting the displayed values can be done in the service setting menu.Table 5Worthington-Creyssensac 09/0462 205 930 11 Page 7
Page 1 and 2: User’s manualENVCI07For variable
Page 3 and 4: 1 - General informationThe VCI07 co
Page 5: How the different menus and sub-men
Page 9 and 10: 3.3.5 Machine configurationIn the m
Page 11 and 12: 4 - ContrastThe only possible adjus
Page 14 and 15: NOTES______________________________
Page 16: Export DepartmentFrancePhone : 33 (

VCI07 - Duncan Rogers

Create successful ePaper yourself

Delete template?

Save as template?