Instructions for Authors - Facultatea de Mecanica Craiova ...

SMAT2008M29ERROR ON THE GEOMETRICAL SHAPE OF TEETH PROFILEAlina DUTA, Ludmila SASSAbstract: It is presented a mathematical model of the longitudinal and transversal vibrations of theholder tool-post shaft of the FD320 milling machine that caused errors on the geometrical shape of teethprofile. These displacements are important because influence errors of cylindrical gears and theirfunctioning correctly, without noise in practice.Alina, DUTA, PhD., Associated professor, Faculty of Mechanics, Autovehicles Department, E-mail: duta_alina @yahoo.comLudmila, SASS, , PhD., Associated professor, Faculty of Mechanics, Autovehicles Department, E-mail: ludmila_sass @yahoo.comSMAT2008M30EXPERIMENTAL STUDY OF A FULL CORRECTION OF SNAILSWITH MORE BEGINNINGS - THE CONVENTIONAL GADGETProf. dr. ing. Nour. I. CRISAN, Conf. dr. ing. Dumitru NEAGOE, Conf. dr. ing. GelicaSTĂNESCU, ing. drd. Adrian BERCEANUAbstract: In the present paper, presented an experimental study on a full correction of snails with more beginnings,on a conventional machine-tool results and conclusions of this process. KeywordsCrisan NOUR, prof. Dr. Ing. Facultatea de Mecanica, Universitatea Tehnica Cluj-NapocaConf. dr. ing. Dumitru NEAGOE, conf. dr. ing., Facultatea de Mecanica Craiova, ARMIAGelica STĂNESCU, conf. dr. ing., Facultatea de Mecanica Craiova, ARMIA,stanescu_gelica@yahoo.comAdrian BERCEANU, drd. ing. S.C. Cambric Consulting SRL Braşov, punct de lucru Craiova,aditoi2002@yahoo.com69