IMAGE 42 /62 - SEAL Graphics

More documents

Recommendations

Info

Safety Features• If the machine is running then:- pressing an emergency stop button will immediately stop therotation of the rollers. After the emergency stop has beenreleased, the upper roller will move to its MAX opening.- lifting the in-feed table will immediately stop the rotation ofthe rollers. When the in-feed table has been swung back toits normal position, the upper roller will move to its MAXopening.- even tipping the in-feed table upwards (with your knee) willstop the rotation of the rollers, and lift the upper roller.• If the machine is NOT running then:- pressing the emergency stop buttons or lifting the in-feedtable will NOT result in lifting the upper roller.- if the upper roller is moving downward (during nip setting)then the upper roller will reverse its movement (goes to MAXopening) when the photoelectric eyes are interrupted at thatmoment.WARNING: Use of the inside of cabinets for storage may causepossible injury and/or damage to the inner workings and will void thewarranty.10
General InformationEnWorking SpaceR = RollL R = Roll length (115 cm for Image <strong>42</strong>, 160 cm for Image <strong>62</strong>)L B = Maximum board length11
Page 1 and 2: IMAGE 42 Plus /62 PlusEnglishFranç
Page 3: IMAGE 42 Plus /62 PlusEnglishUser m
Page 6 and 7: IllustrationsSubjectPageFeatures an
Page 8 and 9: Features and Benefits of the Image
Page 10 and 11: Safety InformationThe IMAGE 42 plus
Page 14 and 15: General Information• Power Source
Page 16 and 17: Uncrating and Moving The Image 42 p
Page 18: Connection to the Electrical Supply
Page 22 and 23: Control PanelThe laminator’s cont
Page 24 and 25: Control Panel☞Changingfrom normal
Page 26 and 27: WebbingSpecific webbing instruction
Page 28 and 29: Roller Nip SettingsWhenever you mou
Page 30 and 31: Laminating and Adhesive Coating (De
Page 32 and 33: Laminating and Adhesive Coating (De
Page 34 and 35: MountingStep 7 - When the end of th
Page 36 and 37: EncapsulatingStep 1b - Linered film
Page 38 and 39: Pre-CoatingThis process is used to
Page 40 and 41: Cleaning & MaintenanceCleaningDo no
Page 42 and 43: TroubleshootingProblem: The machine
Page 44: AccessoriesThe following accessorie

IMAGE 42 /62 - SEAL Graphics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?