EMI/EMP Filter Connectors Catalog - Glenair, Inc.

D-SubminiatrureConnectors240-066D-Subminiature Connector, Right Angle MountEMI Filtered (MIL-DTL-24308 Type)Filter ConnectorProduct CodeMIL-C-2483 TypeContact DensityS = StandardH = HighShell Material/Finish(See Table II)Filter Value(See Table IV)Footprint TypeM = Mil-SpecE = European(See Table V)240 - 066 S - 15P J C A C M - GMCShell Size and Contact Type(See Table I)Ø.122 +.003-.002Filter Value(See Table III)Mounting OptionsB = Through HoleC = 4-40 InsertM = Metric Thread (M3)Shell to Shell GroundingG = With Ground (Plug/Pin Only)N = No GroundK(G)Inboard Contact RowTo Mounting HoleGHØ.030 ±.002Ø.020 ±.002 For High DensityHGH Typ 3 PlØ.020 ±.002HIGH DENSITY (15 THRU 62) AND STANDARD DENSITY 50 POSHIGH DENSITY 78 POSITIONED Pin(Inside)B Socket (Outside)B Pin (Inside)CAD Socket(Outside).250 (6.4)Ø120/.125 or4-40 UNC Threaded InsertTyp 2 PlFE.186±.020(4.7 ± 0.5).233 +.003 For Plug-.004.243 ±.005 For ReceptacleG.125 (Through Hole).142 (Threaded Hole).093STANDARD DENSITY (9 THRU 37)HSee Note 2G-groundingOn Top And BottomEdges (Plug Only)PLUG VIEWPLUG VIEWRECEPTACLE VIEWAPPLICATION NOTES1. Materials/Finishes:Shells - See Table IIInsulators - High grade rigid dielectric/N.A.Contacts - Copper Alloy/Gold Plated2. Assembly to be indentified with date code, cage code, Glenair P/N,and serial number.3. Dimensions B and D taken from inside of shell forPin/Plug and outside for Socket/Receptacle.4. Electrical Performance:Dielectric withstanding voltage class A and B: 100VDC, all others: 500 VDCInsulation Resistance: 5,000 megohms @ 100 VDCCurrent Rating Standard Density: 7.5 Amps max.Current Rating High Density: 5 Amps maximum5. Metric dimensions (mm) are indicated in parentheses.© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comE-6E-Mail: sales@glenair.com