EMI/EMP Filter Connectors Catalog - Glenair, Inc.

EMI ShieldingAccessoriesComposite ThermoplasticUser Adjustable Swing-Arm AssemblyTechnical InformationConductorTape Wrap under Ringto Ensure FitFigure 1Glenair Swing-ArmOffers Extremely Fast andTrouble-Free Terminationof EMI Shielding:Overall Braidfrom Backshell600-052Overall Braid from WireBundle (If Applicable)Optional Tape Wrap687-207 Split ShieldSupport RingChoose Straight, 45° or 90° angle, andtighten screws to lock arms in place. Leavethe saddle clamp hardware loose.Next, insert the wire bundle into thebackshell to determine if the braid transitionangle from the backshell to wire bundle isless than 45º. If it is less than 45°, build upthe wire bundle with tape and re-insert wirebundle into backshell to support the transitionof overall braid from the backshell to the wirebundle.Tuck Braidas ShownLacing String or HighTemperature Ty-StrapFigure 2SupportRingHLoosely assembly the adapter to theconnector and push back the backshell braid.Insert the wire bundle into the adapter andbottom it against the connector. Holding thecable, mark or tag the location where theshield support ring (Glenair Part Number687-207) will be located. This distance mayvary depending on your technique and theflexibility of the wire bundle immediately tothe rear of the saddles (Figure 1).ShieldPigtailFigure 3ConductorsLacing String or HighTemperature Ty-StrapEqually SpacePigtails Around Ring© 2008 Glenair, Inc. CAGE Codes 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-12E-Mail: sales@glenair.com