8453 UV-visible system - operator manual.pdf

More documents

Recommendations

Info

Installation and Start UpThis chapter does not replace the information available with the InstallingYour UV-visible Spectroscopy System manual. It is meant as a reminder ofthe key steps of the installation and the system startup.The following topics are covered.• “Installation Summary for Your Agilent 8453 General Purpose UV-visibleSystem” on page 37.• “Starting a Measurement Session” on page 39.36
Installation and Start UpInstallation Summary for Your Agilent 8453 General Purpose UV-visible SystemInstallation Summary for YourAgilent 8453 General Purpose UV-visibleSystemGeneralA detailed description of your Agilent 8453 general purpose UV-visible systemis given with the manual Installing Your UV-visible Spectroscopy System.The summary reminds you of the key points of installation.Spectrophotometer❏❏Make sure that your spectrophotometer has the JetDirect card installed.Check that your spectrophotometer is either connected to your PC directlyusing a twisted LAN cable or to your LAN using a direct connection.WARNINGDo not connect the LAN adapter of your PC to the CAN interface ofthe Agilent 8453 spectrophotometer, otherwise the LAN adapter ofthe PC will be seriously damaged, because the operating voltage of theCAN interface (12 V) is higher than the operating voltage of the LANadapter (5 V).❏Check that your spectrophotometer is connected to a power outlet.WARNINGAlways operate your instrument from a power outlet which has aground connection. Always use the power cord designed for yourregion.❏Before you switch on your spectrophotometer, make sure that the CAG BootpServer is running on your PC or your network administrator has assigned anIP-address to your spectrophotometer. For details see the chapter “LANCommunication, Installation, Connection and Configuration” in yourInstalling Your UV-visible Spectroscopy System manual.37
Page 1 and 2: Agilent 8453 UV-visibleSpectroscopy
Page 3 and 4: Agilent 8453 UV-visible Spectroscop
Page 5 and 6: Contents1 Introduction to Your Syst
Page 7 and 8: 11 Introduction to YourSystemConcep
Page 9 and 10: Introduction to Your System9
Page 11 and 12: Introduction to Your SystemOptical
Page 13 and 14: Introduction to Your SystemOptical
Page 15 and 16: Introduction to Your SystemSpectrop
Page 17 and 18: Introduction to Your SystemSpectrop
Page 19 and 20: Introduction to Your SystemUser Int
Page 21 and 22: Introduction to Your SystemUser Int
Page 23 and 24: Introduction to Your SystemSoftware
Page 26: Introduction to Your SystemStandard
Page 29 and 30: Introduction to Your SystemStandard
Page 35: 22 Installation and Start UpSummary
Page 39 and 40: Installation and Start UpStarting a
Page 41 and 42: 33 Good MeasurementPracticesGeneral
Page 43 and 44: Good Measurement PracticesGeneral C
Page 53 and 54: Good Measurement PracticesInserting
Page 55 and 56: 44 Using your Agilent 8453UV-visibl
Page 57 and 58: Using your Agilent 8453 UV-visible
Page 87 and 88:
Using your Agilent 8453 UV-visible
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
IndexNumerics2,2,4-trimethylpentane
Page 101 and 102:
Indexn-hexane, 48nominal spectral s
Page 104:
s1In This BookTo be able to use you
show all

8453 UV-visible system - operator manual.pdf

Create successful ePaper yourself

Delete template?

Save as template?