User manual in English - Humeca

More documents

Recommendations

Info

28Fig. 27 Always move the cutting block from the side of the hand wheel to theother side; never the other way round !!Fig. 28 The cam is placed on thecutting block to prevent sticking of thegraft to the cover at openingFig. 29 First lift the cover a little, whilepressing the cam down……
29Fig. 30 ….. then open the coverFig. 31 The double cutting blockFig. 32 The graft is cut into 196 squaresFig. 33 The central pleated area of a gauzeFig. 34 The graft, fixed tothe gauze after removal ofthe cork plate
Page 1 and 2: MEEK - MicrograftingManualCylindric
Page 3 and 4: Contents3I. Mounting and dismountin
Page 5 and 6: 5Attention:Beware that the motor do
Page 7 and 8: Some additional remarks regarding c
Page 9 and 10: 3. Preparing the skin before cuttin
Page 11 and 12: 116. Applying adhesive to the autog
Page 13 and 14: 10. Local therapy13We like to point
Page 15 and 16: Problem Possible cause SolutionSkin
Page 17 and 18: Problem Possible cause SolutionAfte
Page 19 and 20: IV Ordering19When ordering, please
Page 21 and 22: 21MEEK MicrograftingPicturescylindr
Page 23 and 24: 23Fig. 3 Motor and sterile casingFi
Page 25 and 26: 25Fig. 15 Placing the hand drive (1
Page 27: 27Fig. 21 Prefolded gauze and cork
Page 31 and 32: 31Fig. 37 The extended gauze with g
Page 33: Fig. 41 Result of burn treatment by

User manual in English - Humeca

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?