2200 Enteral Feeding Pump

Operating Instructions (Cont’d)15. Press RUN/HOLD to begin feeding.16. To change rate or to clear volumedelivered display, first place pumpon hold by pressing RUN/HOLD. IfINC or DEC, or TOTAL RESET ispressed with pump not in the holdmode, an audible alarm will sound.17. To turn the pump off at any time,press OFF.Note: If the delivery set has a rollerclamp, maintain the roller clamp ina fully closed position whenever thepump is not in operation and whenmanipulating the administration setor the feeding tube to prevent freeflow.CAUTION: This pump has a memory retention feature. Always check infusionrate and administration set position prior to and during operation. Pumpshould be positioned well above the patient’s feeding site.11