download assembly guidelines - Ashford Handicrafts

More documents

Recommendations

Info

ASSEMBLY INSTRUCTIONS FOR THE ASHFORD TRAVELLER SPINNINGWHEEL -Single Drive-Tools RequiredBefore commencing, please read these instructions completely, identify the parts and note the assembly sequence.Remove any sharp corners or edges and smooth the surface of the wood with the sand paper provided. Werecommend that the wood surfaces be waxed or sealed before assembly. This protects the kiln dried wood from theclimatic changes and prevents it getting dirty or stained. The Silver Beech tree is a native of New Zealand and has alovely variety of colour and grain. For a silky smooth matt finish, use the Ashford Wax Finish to enhance the naturalcolours and character of this timber.If you are assembling your spinning wheel on a table, we recommend you protect the surface with a towel, blanketor cardboard. Ashford spinning wheels are also available factory finished in clear lacquer.Meaning of SymbolsCheck hardware againstfull size illustration.To make assembly easier use candlewax on the screws and hooks.Check the directions carefully.RightWrongWhen you use the allen key, make sureit is at 90 degrees and is at the bottomof the holeIf the hook is hard to turn use the allen key.Traveller Single Drive Spinning Wheel - Hardware Listx 2 x 2 x 4 x 4 x 2 x 1 x 13 x 1x 1 x 2x 2x 4x 2x 1x 1x 2x 1x 3
Traveller Single Drive Spinning Wheel - Parts ListFlyer Maiden Bar Maid UprightsAdjusting Knob Tension Knob Treadle AssemblyBaseLegs - 2 with holes& 2 withoutWheel SupportsConrods & Crank Wheel Maiden Bar SupportsTop Rail4 X Bobbins
Page 1: INSTRUCTIONSTRAVELLER SPINNING WHEE
Page 5 and 6: Check the angle of nylon bearingsan
Page 7 and 8: Locate the treadle rail into thehol
Page 9 and 10: Check the alignment ofthe holes for
Page 11: Rotate the hub pin untilit is a fir
Page 14 and 15: Tie the threadinghook to the frontm
Page 18: Ashford Handicrafts Ltd.Factory and

download assembly guidelines - Ashford Handicrafts

Create successful ePaper yourself

Delete template?

Save as template?