HAUCK LONG NOSE STARJET BURNER LNSJ360 – LNSJ980

F. BURNER MOUNTINGPage 11LNSJ -9X5375(NOT TO SCALE)Figure 7. Burner Mounting Tube Detail1. The burner should be mounted on the drum centerline at the same pitch as the drum.Install a structure to support and position the burner's skid. Burner repositioning may berequired for final burner adjustment.2. Position the mini-skid on the support and securely bolt it in place.3. Position the burner so that the distance from the inlet of the mounting tube to either thebracket supporting the pilot, scanner and spin vane, or to the heatshield (whichever isapplicable) satisfies the “F” minimum dimension (see Figure 7).4. Position the burner so that the end of the flame cone holder is flush with either the start of theflared section or the open end of the burner mounting tube (whichever is applicable).IMPORTANTThe pilot flame UV scanner must be aligned to view justabove the pilot as it passes through the flame holdercone. The main flame UV scanner should be sighted justover the edge of the flame holder cone, in line with theflame.