HAUCK LONG NOSE STARJET BURNER LNSJ360 – LNSJ980

N. LIQUID PROPANE (LP) FUEL PIPING SYSTEMPage 32LNSJ -9WARNINGAdjustment of this equipment and its components by unqualifiedpersonnel can result in fire, explosion, severe personal injury, or evendeath.LP is highly flammable and heavier than air. It will accumulate nearthe ground in the area of a leak and it dissipates relatively slowly.NOTEHauck recommends the use of LP manifolds that meet NFPA guidelines. NFPArequires two safety shutoff valves piped in series in the burner's main LP line. Alow/high pressure LP switch must be interlocked with the burner's safety shutoffvalves. Hauck's LP manifolds have been designed to ensure compliance to NFPArequirements. All piping must be installed in compliance with applicable pipingcodes and regulations. Equipment must meet the ratings for service as indicated inNFPA 58.1. Before attaching LP fuel lines, purge the lines with compressed air. Then, leak test piping withcompressed air.2. Connect the main LP line at the appropriate connection on the burner skid. The capacity ofthe LP fuel system should be 1.5 times the rated capacity of the burner.3. If Hauck has supplied the LP pump set for this application, consult the pump installationinstructions for information on this unit, taking special care to avoid upward loops and anyother conditions that may trap vapor.