HAUCK LONG NOSE STARJET BURNER LNSJ360 – LNSJ980

5. Periodically check all safety equipment, such as pressure switches, solenoid valves, andfuel safety shutoff valves, to make sure they are not clogged with dirt, or in any wayinoperative.Page 48LNSJ -96. Check and clean UV scanner lenses as conditions dictate to keep them clean of dirt and dust.7. Periodically, check and clean the air openings around the burner front.8. To prevent vibration and misalignment, periodically check to make sure that the secondary airsleeve locking bolt, spin vane adjusting ring locking bolt, and flame holder cone locking boltsare tight.9. Periodically check air/fuel ratio to ensure that the burner is operating at peak efficiency.Exhaust gas analysis can be performed with most commercially available gas analyzers.T. RECOMMENDED SPARE PARTSITEM QTY PART NO. DESCRIPTION1 1 16847 Control Motor, Med. Torque (SJ 360-580 only)2 1 20627 Control Motor, High Torque (SJ 750-980 only)3 2 20579 UV Scanner4 1 20533 Low Fire Limit Switch w/Adjustable Lever5 1 84447832 Air Pressure Switch 12-60"wc (3 - 15 kPa)6 1 15773 Gas Pilot Solenoid ValveTable 9. Recommended Spare Parts