JANUS Engineering Training 0.4.pdf - Grostech.com

Box (Controller)IDC Card Capacity IDC-MEM-UPG-65KName the BOXBox address (1 - 63)Max 32 on each lineLineDoor or I/ONormal BoxReportingEnter a descriptionof where thisController/Box isphysically located.This field is providedto assist futuremaintenanceengineers to locatethe Controller/Box.eSeries Devices; ADDRESS 1 insoftware but DO NOT addressboard. Leave all 8 DOWN.Poll Box - Click in the Poll Box field if you want the Controller/Box to be polled by the system.This feature is used to pre-define the system software before the hardware is installed. If thePoll Box field is not selected, 'Off-Line' alarms will be inhibited making the commissioningprocess easier to manage.• The IDC holds cards that have access to its readers inonboard volatile memory. There is space for just over 12,288cards• If User Definable PINs are required, special firmware needs tobe loaded into the IDC. This will restrict the number of cardsat the IDC to 6,144• To increase the number of cards available at a box, fitmemory expansion (Power the Board down first)• IDC Total cards: 65,280 (User Definable Pin – 55,296)454622