ICD Freestyle Paintball Manual - Paintball Manuals

Maintaining your ValveREMEMBER! The rear main body MAY NOT be removed from the back of the markerwhen the marker is pressurized! When the rear main body is removed the cylinder assemblybecomes visible, as shown in the far left picture. The black cylinder body may be unscrewedfrom the back receiver. The valve housing rests underneath, as shown in the second picture. Thewhite valve housing tip may be unscrewed to be cleaned or for o-ring replacement. The valvepin is screwed into the piston, and may be unscrewed for cleaning or o-ring replacement. Useonly URETHANE 90 o-rings for the piston, valve pin, and interior of the cylinder assembly.