Call Control Curriculum Path - Genband

tracing and modifying data for intra-office calls (TDM and SIP), inter-office outgoing callsincluding equal access (ISUP and SIP), inter-office incoming calls (ISUP and SIP), interofficetandem calls including equal access (ISUP and SIP), as well as configuring CLASS andAIN/LNP. Course 1240Z consists of approximately 20 hours of self-paced Web eLearningand two 2-hour Live Online Centra classroom sessions (Facilitated eLearning). Completion ofthis course allows learners to demonstrate their knowledge of the 0293A prerequisites withrespect to C15 translations. A minimum score of 60% is required to pass the postassessmenttest prior to enrollment in course 0293A.Intended Audience:Course 1240Z is intended for anyone responsible for completing any portion of the initialinput data and switching personnel responsible for office translations on the C15.Completion of this course allows learners to demonstrate their knowledge of the 0293Aprerequisites with respect to C15 translations.Objectives:After completing this course, the student will understand the theory relating to:Add, modify, and query all the databases and translators for:o Intra-office calls (TDM and SIP)o Inter-office outgoing calls including Equal Access (EQA) (ISUP and SIP)o Inter-office incoming calls including Equal Access (EQA) (ISUP and SIP)o Inter-office tandem calls including Equal Access (EQA) (ISUP and SIP)Process for configuring CLASS in a C15 officeProcess for configuring AIN/LNP in a CS 1500 officePrerequisite Skills:A basic understanding of basic telephony including digital conceptsCoursePrerequisite Courses:1235W Introduction to VoIP/SIP or equivalent knowledgeCourse 1236F Overview-Engineering (1.5-day Blended Learning)Course 1238Z Fundamentals of CCS7-AIN-LNP (2-day Blended Learning) with an60% pass mark, or equivalent knowledge with an 60% pass mark in the assessmentpre-test 1239JCourse Length and Delivery Method:20 hours Self-Paced and 4 hours of Leader LedRegister by going to http://www.genband.com/Home/Resources/Training-Course-Registration.aspx.For questions or comments regarding GENBAND Training, email training@genband.com or call 972-461-4134