INSTRUCTION BOOK - Janome

Step 1b Start the machine to sew the buttonhole.The buttonhole will be automatically sewn.Step 1: The machine will sew the front bartack andthe left row first.Then it goes back to the starting point withstraight stitch.Step 2: The machine will sew the right row.Step 2Step 3: The machine will sew the back bartack.Step 3Step 4!2Step 4: The machine will stop automatically and a dotwill blink.!2 Blinking dotTo sew another buttonhole, raise the presser foot.Move the fabric to where the next buttonhole is to besewn, then lower the foot and start the machine.NOTE:If you start sewing the buttonhole without lowering thebuttonhole lever, the indicator will show a warningsign.Lower the buttonhole lever, then restart the machine.NOTE:If you select another pattern without raising thebuttonhole lever after buttonhole sewing, the indicatorwill show a warning sign.Raise the buttonhole lever, then select the pattern.n!3!4nRemove the fabric and place a pin just below thebartack at each end to prevent accidentallycutting stitches. Cut the opening with the seamripper. Use an eyelet punch to open akeyhole buttonhole.!3 Pin!4 Seam rippermmWhen buttonhole sewing is finished, push thebuttonhole lever upward as far as it will go.t Buttonhole levert25