INSTRUCTION BOOK - Janome

q w eCorded buttonholeMachine Settingsq Pattern: #14w Presser foot: Automatic buttonhole foot Re Thread tension: 1 – 5To sew a corded buttonhole, follow the sameprocedure as for a square buttonhole (sensorbuttonhole).z xz With the automatic buttonhole foot R raised, hookthe filler cord on the spur on the back of thebuttonhole foot.qwx Bring the ends of cord toward you under thebuttonhole foot clearing the front end.Hook the ends of the filler cord into the forks onthe front of the buttonhole foot to hold them tight.q Spurw Forkse Cordc vec Lower the needle into the garment where thebuttonhole will start and lower the foot.v Lower the buttonhole lever and buttonhole foot.Start the machine and sew the buttonhole over thefiller cord.The machine stops automatically when finished.NOTES:Set the stitch width in accordance with the thicknessof the filler cord used.To cut the buttonhole opening, refer to page 25.b nb Remove the fabric from the machine and cut thesewing threads.n Pull the left end of the filler cord to tighten it.Thread the end of the cord through a darningneedle and draw it to the wrong side of the fabricand cut.27