INSTRUCTION BOOK - Janome

Problems and Warning SignalsIf a buzzer sounds and the indicator shows a warning sign, follow the guidance below.Warning signalProblemTry thisThe start/stop button is pressed with the footcontrol being connected.The foot control is connected or disconnectedwhile sewing.Disconnect the foot control.Turn the power switch off whenconnecting or disconnecting thefoot control.The machine is re-started too soon after ithas halted due to the overload.Wait for at least 15 seconds to restart.If threads are jamming, removejammed threads.The buttonhole is sewn without loweringthe buttonhole lever.Lower the buttonhole lever andrestart the machine.Selecting a pattern after buttonhole is completedwith the buttonhole lever still lowered.Raise the buttonhole lever and reselectthe pattern.Do not sew other pattern with thebuttonhole foot.The bobbin winder spindle is shifted to the rightfor bobbin winding.Return the bobbin winder spindleto the left.toThe machine is malfunctioning due to aproblem in the electronic components.Contact the service center or thestore from where the machine waspurchased.NOTE:The safety device will shut the power down when the machine is locked. If the threads are jamming, removethe jammed threads and turn the power on again after 3 minutes.Audible signalPipPip-pip-pipPip-pip-peepPeepThe buzzer sounds when:Normal operationInvalid operationButtonhole sewing completedMalfuncitonIt is not abnormal that a faint humming sound is coming from the internal motors.This machine equipped with LED sewing light, which will not burn out and does not need to be replaced.37