Owner's Manual - Kipor Power Systems

5.4 Smart ThrottleWhen the SMART throttle is placed in the on position, engine speed is kept atidle automatically when the electrical load is disconnected and returns to theproper speed required by the electrical load when the load is reconnected. Theengine speed varies according to the amount of load applied to the generator.Placing the smart throttle in the on position is recommended to minimize fuelconsumption and engine noise while in operation.■When high electrical load appliances areconnected simultaneously, turn the SMARTthrottle switch to the OFF position to reducevoltage fluctuation.■The SMART throttle system does not operateefficiently if the electrical appliance will be used ina rapid on-off or low to high rpm mode.When the smart throttle is in the off position, the engine runs at rated loadRPM.5.5 Air Conditioning OperationFor best results, the SMART throttle switch should be in the off position. Bringthe generator to a normal operating temperature before applying the airconditioning load. Always allow a 2 minute wait period when manually cyclingan air conditioner off and on. A longer wait period may be required underunusually hot weather conditions. Additionally, all other loads should be turnedoff until the air conditioner has started and is performing normally. It is alsoimportant to follow the air conditioner manufacturer's instructions for startingandrestarting for proper operation. Some air conditioner manufacturers offer- 24 -