Owner's Manual - Kipor Power Systems

12.2 IG6000H15 24 37 61. IG6000H Chassis- installed 5. 10” Wheel2. Support Bracket- (4) 6. Wheel Washer (4)3. Front Stabilizer (2) 7. Wheel Clip4. Axle AssemblyAssembly:1. Install the four support brackets and secure with bolts.2. Attach the front stabilizers to the chassis (below the handles)3. Attach the axle assembly.4. Install one washer on the axle against each welded stop.5. Install the two wheels.6. Install the two remaining washers and secure with the wheel clips.The handles are preassembled before packaging. To raise the handles, simply raise thehandle assembly to a horizontal position. To retract the handles, slide the chrome collarstoward you to clear the sleeve and lower them to the starting position.- 42 -