Windows Setup Guide for ST-B10 - Toshiba Tec

More documents

Recommendations

Info

Windows Setup Guide for ST-B10TOSHIBA TEC CORPORATION EAA-030335. Installation and Setup for Touch PanelThe outline of procedures to set up drivers on the ST-B10 is as follows. Please make sure toconnect touch panel to ST-B10 whenever installation for touch panel.Setup Procedure:5.1. Installation for Elo Touch Panel Driver5.2. Additional installation for Elo Touch Panel Driver5.3. Clearing the warning message on Control Panel of Touch Panel driver5.4. Calibration for Touch PanelPlease refer to table below to install for Touch Panel Driver.Purpose of InstallationYou want to use single Touch Panel.You want to use dual Touch Panel.You want to add second Touch Panel.Reference Section5.1 Installation for Elo Touch Panel Driver5.2 Additional installation for Elo Touch Panel DriverNote:Please reboot ST-B10 upon request during installation for Elo Touch Panel Driver.49
Windows Setup Guide for ST-B10TOSHIBA TEC CORPORATION EAA-030335.1. Installation for Elo Touch Panel DriverRun ”XPU4.8.7b.exe” in the “ST-B10Win¥Display¥TFTST-A20_TFTST-B20¥ELOTouchPanel”folder in the Driver Kit CD-ROM, and the following window appears. Click on the “OK” button.The following window appears. Click on the “Unzip” button, then the files are decompressed.The following window appears. Click on the “OK” button.50
Page 1 and 2: Windows Setup Guide for ST-B10TOSHI
Page 51: Windows Setup Guide for ST-B10TOSHI

Windows Setup Guide for ST-B10 - Toshiba Tec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?