Windows Setup Guide for ST-B10 - Toshiba Tec
Windows Setup Guide for ST-B10 - Toshiba Tec
Windows Setup Guide for ST-B10 - Toshiba Tec
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Windows</strong> <strong>Setup</strong> <strong>Guide</strong> <strong>for</strong> <strong>ST</strong>-<strong>B10</strong>TOSHIBA TEC CORPORATION EAA-03033The following calibration screen appears. Per<strong>for</strong>m a calibration by touching the mark wheneverit appears. (The mark appears three times.)Note:The calibration screen appears one time each a touch panel. The calibration screenappears two times at two touch panels.In the case of Dual Display, please refer to the table as below.Remainder to use dual touch panelDisplay modesRemainder of CalibrationThe calibration screen appears on both panels two times. When youClone calibrate touch panels, sequence of calibration does not make anydifference.ExtendeddesktopThe calibration screen appears Primary display. After that, the screenappears Secondary display.Remainder to use single touch panel and another non-touch displayDisplay modesRemainder of CalibrationCloneExtendeddesktopThe calibration screen appears both monitors. Please calibrate touchpanel.The calibration screen appears Primary display.If Secondary display is touch panel, press “Esc” key from keyboard. Thecalibration screen appears Secondary display.69
Change language