BB-9 Product Line Catalog - Flow Ezy Filters

MELTBLOWN CARTRIDGESMeltblown nonwovens are highly engineeredfabrics made of fine synthetic fibers thathave been thermally bonded to form a webstructure. Filtration is the fastest growing enduse market for nonwovens, both liquid andair. This is a process for producing fibrouswebs directly from polymers using highvelocity air to soothe the filaments.We offer a full range of pleated filters withmeltblown polyester and polypropylenemedia. These cartridges provide high solidloading capacity and long service life.Where cost efficiency is a must, chooseour meltblown filter cartridges.• Filtration levels are available in 1,3, 5,10,20,30, and 40 micron.• End cap configuration options are doubleopen end, single open end, single openend with aligning fin, and single open endwith either double -222 or -226 o-rings.We can also supply plastisol end capsin double open end.• The core is polypropylene.• Standard OD of all cartridges is 2-1/2 inch.• The temperature rating of the cartridges is225°F /105°.• Pressure rating is 150 psi with therecommended pressure drop for servicingrated at 35 psid max.HOW TO ORDERBuild an ordering code as shown in this example:PLEATED CARTRIDGE= PLMELTBLOWNMEDIAPolypropylenePolyesterMICRON SIZE*1, 3, 5, 10, 20, 30, 40= MB= PO= PEOVERALL LENGTH (IN)*9.75, 10, 19.5, 2029.5, 30, 39.5, 40PL - MB - PO - 3 - 10 - DOE-PO - B - OCOTHER OPTIONSAvailable with polypropylene end caps onlyF = Locator finOC = Polypropylene outer coreGASKET/O-RING OPTIONS*B = BunaV = VitonEND CAP CONFIGURATION*Polypropylene end cap optionsDOE-PO = Double open endSOE-PE = Single open end222-PO = 222 o-ringPlastisol end cap optionsDOE-PL = Double open end*Other micron sizes, lengths, end cap configurations and gasket/o-ring options may be available30