snazzi pushchair workshop manual - Tendercare Ltd

Snazzi Pushchair Workshop Manual7.7: Footrest Parts:If a complete footrest assembly is ordered, it comes supplied with footrest slide with the traypre-assembled, footrest stems and the angle adjustors. For information on fitting theseplease refer to the instructions given in section 7.7.1 (for the angle adjustors), and 7.7.2 (forthe stems) and 7.7.4 (for the slide and tray assembly) below.7.7.1: Knee Angle Adjustors:To replace the knee angle adjustors:First remove the M5 bolt securing thefootrest stems into the adjustors using a3mm hexagon key and 8mm socket orspanner as shown (see Fig 7.7.1.1). Takenote of the position of the washers.Fig 7.7.1.1Take the footrest stems (complete with thefootrest and slide) out from the adjustors andset aside.Fig 7.7.1.2Document No: 055-05 v1b Page 24 of 29 August 2012Snazzi Pushchair Workshop Manual.docx