snazzi pushchair workshop manual - Tendercare Ltd

Snazzi Pushchair Workshop ManualFig 7.7.1.5 Right: The seat base poles withthe adjustor removed.When fitting the new adjustors, ensure thatthe release buttons are facing towards theoutsides, and refit with new Nylock domenuts- do not reuse Nylock nuts.Fig 7.7.1.57.7.2: Footrest Stems:To replace the footrest stems:Set the footrest knee angle so that thefootrest stems are in line with the seat, andfold the footplate flat against the stems (formore details on adjusting the footrest andknee angle please refer to the user manual).Fold the footrest and seat base up to provideaccess to the back of the footrest stems.Using a screwdriver remove the 2 selftappingscrews from the bottom of thefootrest stems as shown (see Fig 7.7.2.1).Fig 7.7.2.1Document No: 055-05 v1b Page 26 of 29 August 2012Snazzi Pushchair Workshop Manual.docx