Good Connections - County Construction Chemicals Ltd

S 94OTTOSEAL ® S 94The neutral fireprotection siliconeP-HFM-004069LEED ®Characteristics:• Neutral-curing 1-component siliconesealant• Flame resistant• Good compatibility with paints accordingto DIN 52452 (not paintable)• Non-corrosive• Excellent weathering, ageing andUV-resistanceFields of application:• Sealing of structural components, thatrequire an increased fire-behaviour(e. g. fire-resistant building componentsand fire-resistant glazing)• Suitable for sealing glazing units made of laminated andtempered glass. Please contact our technical departmentfor further informationStandards and tests:• Tested and monitored according to DIN 4102-B1 – flameresistant between solid mineral constructional elements(Institute for Wood Research, Technical University Munich,Germany)• Tested according to DIN 25415, part 1 – very good decontaminationproperties of the sealant surface (German MaterialsResearch and Testing Agency, 12200 Berlin, Germany)• General German appraisal certificate P-HFM 004069®• Conform to LEED IEQ-credits 4.1 adhesives and sealantsC00transparentC01whiteC02greyC04blackColour310 mlCartridgeblackS94-04-C04greyS94-04-C02transparentS94-04-C00whiteS94-04-C01Packaging unit20/BoxPieces per pallet 1,200Additional useful information:Building material classes identify the fir behaviour of theindividual building material and is not identical to the fireresistance classes, which identify the fire resistance of thecomplete component. In addition to the building materialclasses according to DIN 4102, there exist also europeanclasses according to DIN EN 13501. Currently, tests andevaluations of sealants have to be carried out according toDIN 4102. Please find the classes opposed in the followingtable (Source: IVD-information sheet no. 11, edition06/2004).DesignationNon-CombustibleFlameresistantNormallyflammableHighlyflammableAdditionalrequirement:no smokeAdditional requirement:no burningdrop-out / drippingEuropean class Classificationaccording to according toDIN EN 13501-1 DIN 4102-1X X A1 A1X X A2-s1 d0 A2X X B,C-s1 d0XB,C-s3 d0 B1X B,C-s1 d2B,C-s3 d2X D-s3 d0 B2ED-s3 d2E-d2FThe classes s1, s2 and s3 are additional requirementsaccording to DIN EN 13501 - formation of smoke. Theclasses d0, d1 and d2 are additional requirements accordingto DIN EN 13501 - burning drop-out / dripping. Thetests are carried out according to DIN EN 13823.Currently, for tests according to DIN EN 13501 only existtest standards for holoheteral sealings and no test standardsfor sealants and sealing tapes.B392Other quantities and special colours on request. Please observe the technical and security data sheets – www.otto-chemie.com