Wadkin C5 C6 C7 C8 C9 Bandsaw Manual and Parts List
Wadkin C5 C6 C7 C8 C9 Bandsaw Manual and Parts List
Wadkin C5 C6 C7 C8 C9 Bandsaw Manual and Parts List
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HINTS ON. Cll'l"l'ING.311. Watch Feed Directions SEE FIG.34.~tally follow the path of the cut before actually cutting the work. If notstarted properly ~ pieces of work will foul agains.t the trunk of themachine. -2. Make Short Cuts First SEE FIG. 35.When a choioe of starting points is offered, alva:rs make short outs. first.Back tracking out of a short cut can be done much more quickly than backingout of a long cut.3. Backtrack- on Corners; SEE FIG.,6.Very narrow grooves must be nibbled as shown at A, B, C. On other insidecorner ana then backtrack to lead the blade over to second line.BANDSAW BLADES.Spare b<strong>and</strong>saw blades of the correct lenght, ready Bet <strong>and</strong> sharpened, for woodcutting are available from stock. Where it is preferred, b<strong>and</strong>saw blading instrip form can be supplied for customers to make up their own blades. Thisb<strong>and</strong>eaw strip is offered either toothed only or toothed, sharpened <strong>and</strong> set.In addition to woodcutting, we can supply b<strong>and</strong>saw blades for plastics, bonded_wood, non-ferrous metals, meat, ect, provided that the correot machine speeds·are available.TAPER TRIANDGULAR FILES FOR HAND USE.Length."ao ••••••••••••••• 6", 8 1t , 10".The edges of these files have rounded oorners to produce the round gullet whichprevents saw cracks.BANDSAWBLADES •<strong>C5</strong> St<strong>and</strong>ard <strong>B<strong>and</strong>saw</strong> Blade; 416.5mm (13ft.8inSlc6 St<strong>and</strong>ard <strong>B<strong>and</strong>saw</strong> Blade, 4500mm (14ft9iins<strong>C7</strong> St<strong>and</strong>ard <strong>B<strong>and</strong>saw</strong> Blade, 5080mm ~16ft.8insc8 St<strong>and</strong>ard <strong>B<strong>and</strong>saw</strong> Blade, 5535mm 18ft.2ins<strong>C9</strong> St<strong>and</strong>ard <strong>B<strong>and</strong>saw</strong> Blade, 6300mm 20ft.8ins)long.long.long.long.long.www.wadkin.com<strong>C5</strong> Starrett <strong>B<strong>and</strong>saw</strong> Blade (Hardened Teeth) 4165mm 11 3ft.8ins) long.c6 Sta=ett <strong>B<strong>and</strong>saw</strong> Blade (Hardened Teeth)450Omm 14ft.9iins) long.<strong>C7</strong> Starrett <strong>B<strong>and</strong>saw</strong> Blade (Hardened Teeth~ 5080mm 16ft.8inS~ long.c8 Starrett <strong>B<strong>and</strong>saw</strong> Blade (Hardened-Teeth 5535mm 18ft.2ins long.<strong>C9</strong> Sta=ett <strong>B<strong>and</strong>saw</strong> Blade (Hardened Tseth 6300mm _20ft. Bins long.info@wadkin.comThe starrett b<strong>and</strong>saw blade are hard edge flexible backed wood or metal cuttinglong life blades.NOTE:- These blades can't be re-sharpened as they have hardened teeth.
Change language