Wadkin C5 C6 C7 C8 C9 Bandsaw Manual and Parts List

79SEll'TING SAW GUJJlESThe top and bottom guide units Fig 5 & 6 should be set up as f'ollowswith the top sa"1 guide as close to the stock as practical.1) Loosen grubs crew "A" and M10 "B" Fig 13. then position guide body "G"central and parrellel to blade see Fig 14, then tighten up grubscre"1"A" and M10 Nut "B".NOTE:- Once the guide bracket has been fntially set up, only theadjustment described in paragra;phs 2 & 3 should be necessa:ry.2) Slacken thumb screll "Y" Fig 13, and set near guide roller approximatel,y5mm clear of' back of' blade (See Fig 15) and lock up thumb screwsecurel,y.3) Slacken thumb scre,,,., "X" Fig 13, and move side gIlide rollers f'or\·rardas positioned in Fig 15, then pivot side guide rollers on anti lockeccentrics until they are just clear of' blade and lock thumbscrew "X".FIG 13NOTE:- It is important to check that the side gIlide rollers do not nipthe blade when locked up, and that the guide assembly is squareto the natu:caJ. line of' the blade (see Fig 16).www.wadkin.comFIG 14info@wadkin.com\.-.