Wega 401 M2.40 FKW - EWM Hightec Welding GmbH

Machine description – quick overviewFront viewItem Symbol Description 01 Lifting lug2 Carrying handle3 Cooling air inlet4 Wheels, guide castors5 Connection socket, workpiece lead"Hard" choke tapping6 Connection socket, workpiece lead"Medium" choke tapping7 Connection socket, workpiece leadChoke tapping "soft"8 Coolant tank9 Coolant tank cap10 Automatic cut-out of coolant pump key buttonpress to reset a triggered fuse11 Central connection for welding torch (Euro)Integrated welding current, shielding gas and torch trigger12 Machine controlSee Machine control – operating elements chapter13 Welding voltage step switch, final settingTo finally adjust the welding voltage (select the option to roughly preset the weldingvoltage first)14 Welding voltage step switch, presettingTo roughly preset the welding voltage15 Main switch, machine on/off16 Collective interference signal lightFor error messages, see the "Rectifying faults" chapter17 Ready for operation signal lightSignal light on when the machine is switched on and ready for operation18 Quick connect coupling (red)coolant return19 Quick connect coupling (blue)coolant supply099-005224-EW50108.11.201117