Altus 40 Asie modulis .indd - Somfy Architecture

Replacement of a lost remote controlN.B.: This reset deletes all control points programmed,but the intermediate positions and thesensors are retained.N.B.: Only switch off the current for the motorwhere a remote control is lost.1 22 sec 5 to 15 sec3 41) Cut the power supply for 2 seconds.2) Switch the power supply back on for 5 to 15seconds.3) Cut the power supply for 2 seconds.4) Switch the power supply back on: the shademoves during 5 seconds (If the shade positionis an end limit, the behavior of the shade will bea jog).5) Press the RTS control point (B) PROG buttonuntil the shade jogs: all the RTS control pointsare cleared and the new RTS control point isprogrammed in the motor.5PROG.B2 secAErase the memory of the motor.N.B.: This reset deletes all control points, sensorsand intermediate positions programmed.N.B.: Only switch off the current for the motor tobe reset!N.B.: Before cutting the power, move the shadeto the middle position.1 22 sec 5 to 15 sec3 41) Cut the power supply for 2 seconds.2) Switch the power supply back on for 5 to 15seconds.3) Cut the power supply for 2 seconds.4) Switch the power supply back on: the shademoves during 5 seconds (If the shade positionis an end limit, the behavior of the shade will bea jog).5) Press the RTS control point (A) PROG buttonuntil the the shade jogs twice: all the RTS controlpoints, RTS sensors and intermediate positionare cleared.5PROG.A2 secX 2ABMYC8 Copyright © 2009 Somfy SAS. All rights reserved - V0 - 08/2009