Altus 40 Asie modulis .indd - Somfy Architecture

CommissioningTo commission the motor, an RTS control pointmust be programmed.N.B.: Only one motor can be powered at a time!Programming the RTS control pointSwitch on the power supply.Simultaneously press the UP and DOWN buttonson the RTS control point: the shade moves for afew seconds and the control point is preprogrammedin the motorChecking the direction of rotationPress the RTS control point UP button:a) If the shade is raised, the direction of rotationis correct: move onto the section entitled«Adjusting the end limits».b) If the shade is lowered, the direction of rotationis incorrect: move onto the next step.Press the RTS control point MY button until theshade jogs: the direction of rotation has beenmodified.Press the RTS control point UP button to checkthe direction of rotation.abAdjusting the end limitsNo compulsary order to set the limit.1) Press the UP button to move the shade to thedesired up position.2) Press the MY and DOWN buttons and releasethem once the shade begins to move. The uplimit is memorized.3) Press MY button when it reaches the desireddown position.If necessary adjust the down position, use theUP or DOWN buttons.4) Press the MY and UP buttons and releasethem once the shade begins to move.5) The shade moves up and will stop at its uplimit.6) To confirm the end limits press the MY buttonuntil the shade jogs.The end limits are recorded.1 234 5 56Copyright © 2009 Somfy SAS. All rights reserved - V0 - 08/20093