Rollair 15-20-25-30-40E Fixed & Variable Speed ... - Duncan Rogers

DESIGNED FOR EXCEPTIONALPERFORMANCEHigh efficiency air filtration & oil separationThe air intake is located at high level to prevent larger dustparticles entering.Fresh air is taken from the cold side ensuring an optimumrunning temperature. An encapsulated 2µm intake filterguarantees only clean air enters the compressor for totalreliability.A vertical oil tank allows first cyclonic separation by gravity.Oil separation and oil filter cartridges then ensure aresidual oil level in the compressed air of less than 3 ppm.Increased accessibility and handlingAll usual service operations can easily be done from thefront hinged door.Filter and cartridge change, including oil change and oillevel check.Maintenance costs are kept to a minimum.The units are accessible by a forklift from 3 sides enablingeasy handling.ALL IN ONE AIR QUALITY AND ENERGYEFFICIENCYROLLAIR ® V(T):20-25-30-40EMany industries have a fluctuating compressed air demand.Depending on this profile, using an inverter can bringtremendous savings (up to 30%) and a quick payback(usually less than 2 years). Many countries are nowadditionally supporting these investments with incentives toassist CO2 emission reduction.INTEGRATED INVERTER55%Power consumed12%Investment8%Maintenance3%Installation22%SavingsVariable speed compressor models, ROLLAIR ® V areequipped as standard with the AIRLOGIC ® controller foradvanced communication with the VACON inverter. Thisinverter is located vertically in the electrical cubicle, andequipped with an integrated fan: cooling air is taken fromthe cold area through filtration foam located behind theinlet baffle for improved reliability. The inverter used in theROLLAIR ® V has the latest electronic technology anddedicated software allows precise regulation of the motorspeed in relation to the air demand and a tight pressurecontrol, giving maximum energy savings. ROLLAIR ® Vcompressors are EMC (Electro Magnetic Compatibility)certified which guarantees no magnetic interference withthe electrical network.• Energy savings• Soft start• Avoids off load cycles• Tight pressure control• Low space requirements• EMC design