CSX300UM-251 - Graphtec

More documents

Recommendations

Info

4. INSTALLING THE SOFTWARE4.2 Installing the Driver Software for Windows XP(1) Use the USB cable to connect the scanner to the computer, and then turn on the computer.(2) When Windows starts up, insert the CD-ROM supplied with the scanner into the CD-ROM drive. The“Start” screen opens automatically. Click the [Quit] button to close the “Start” screen.(3) Turn on the power to the scanner.(4) When Windows XP starts up, the following screen appears (if Service Pack 2 has not been installed, thescreen shown in (5) below appears). Select the option “No, not this time” and then click [Next].(5) If Service Pack 2 has not been installed, the following screen appears. Select the option “Install from alist or a specific location (Advanced).” and then click [Next].(6) The screen shown below is displayed. Select the option “Search for the best driver in these locations”and select the check box entitled “Include this location in the search.”Click [Browse] and select the [English]-[DRIVER]-[SCANNER] folders in the CD-ROM drive or enter aCD-ROM drive name and \English\DRIVER\SCANNER using the keyboard.Example: For drive D, enter “D:\English\DRIVER\SCANNER”.CSX300-UM-<strong>251</strong>-9370 4-4
4. INSTALLING THE SOFTWARE(7) Click [Next]. The wizard will start searching for the driver.(8) The screen shown below is displayed. Read the explanation and make sure that you understand thecontents.To continue the installation, click [Continue Anyway].(9) The screen shown below is displayed when the wizard has finished installing the driver.Click the [Finish] button to close the “Welcome to the Found New Hardware” wizard.(10) The Windows XP desktop appears, and the scanner is recognized by the computer.CSX300-UM-<strong>251</strong>-9370 4-5
Page 1: 300-09SERVICE MANUALMANUAL NO. CSX3
Page 4 and 5: CSX300-UM-251-9370ii
Page 7: 12.7 Harness ......................
Page 10 and 11: 1. OVERVIEW*3 Including data-transf
Page 13 and 14: 2. PART NAMES AND FUNCTIONS2. PART
Page 15 and 16: 3. CONNECTION AND PREPARATIONS3.1 C
Page 17 and 18: 3. CONNECTION AND PREPARATIONSNotes
Page 19: 3. CONNECTION AND PREPARATIONS3.4 C
Page 22 and 23: 4. INSTALLING THE SOFTWARE(8) The s
Page 26 and 27: 4. INSTALLING THE SOFTWARE4.3 Insta
Page 28 and 29: 4. INSTALLING THE SOFTWARE4.4 Check
Page 30 and 31: 4. INSTALLING THE SOFTWARE4.6 Check
Page 33 and 34: 5. DAILY MAINTENANCE5. DAILY MAINTE
Page 35 and 36: 5. DAILY MAINTENANCE5.3 Cleaning th
Page 41 and 42: 5. DAILY MAINTENANCE5.9 Scanner Cal
Page 43: 5. DAILY MAINTENANCE(6) To check th
Page 47: 7. LIST OF JIGS AND TOOLS7. LIST OF
Page 50 and 51: 8. DISASSEMBLING AND ADJUSTING THE
Page 74 and 75:
8. DISASSEMBLING AND ADJUSTING THE
Page 76 and 77:
9. ADJUSTMENTS USING THE SOFTWARE(7
Page 78 and 79:
9. ADJUSTMENTS USING THE SOFTWARE9.
Page 80 and 81:
CSX300-UM-251-9370 9-69. ADJUSTMENT
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
9. ADJUSTMENTS USING THE SOFTWAREIm
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
10. TROUBLESHOOTINGCause Checkpoint
Page 103 and 104:
12. PARTS LISTS12. PARTS LISTS12.1
Page 105 and 106:
12. PARTS LISTS12.3 Main FrameNo. P
Page 107 and 108:
12. PARTS LISTS12.4 Top Frame Botto
Page 109 and 110:
12. PARTS LISTS12.6 Bottom ChassisN
Page 111:
12. PARTS LISTS12.9 Other PartsStan
Page 114 and 115:
13. BLOCK DIAGRAM AND CIRCUIT DIAGR
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
show all

CSX300UM-251 - Graphtec

Create successful ePaper yourself

Delete template?

Save as template?