SensoLyt 700 IQ SensoLyt 700 IQ SW - Fagerberg

Measuring / OperationSensoLyt ® 700 IQ (SW)4.2.3 Calibration with CAL CON 2PMessages displayed during two-point calibration with CAL CON 2PDisplay* Have any two buffer solutionsready.* Rinse the sensor.* Immerse the sensor in the firstbuffer solution.* Wait for a stable measuredvalue.* Enter the pH value of the firstbuffer solution.Confirm entered data andcontinue calibration* Rinse the sensor.* Immerse the sensor in thesecond buffer solution.* Wait for a stable measuredvalue.* Enter the pH value of thesecond buffer solution.Confirm entered data andcontinue calibrationSuccessfully calibrated.End of the CAL CON 2Pcalibration.ExplanationYou can use any two differentbuffer solutions the pH value ofwhich is known at the currenttemperature.Follow the instructions on thedisplay. As soon as a stablemeasured value is reached, thenext display appears.Enter the pH value with d.Confirm with g. Themeasurement of the buffersolution begins.Follow the instructions on thedisplay. As soon as a stablemeasured value is reached, thenext display appears.Enter the pH value with d.Confirm with g. Themeasurement of the buffersolution begins.The values determined for Slopeand Asymmetry potential aredisplayed.The calibration is complete.Confirm with g.The display returns to themeasured value display.4 - 4 ba15324e06 12/2005