owneRs manual: Handling & SafeTy inSTrucTionS - Sig Sauer

More documents

Recommendations

Info

The SIG516 is equipped with a telescoping butt stock. The butt stock may vary depending on the model.FIG 7 Magpul MOE Butt StockRelease Latch2.1.6 Gas Valve PositionThe SIG516 gas valve has 3 or 4 positions depending on the model configuration.Gas ValveFIG 8 Adjustable Gas ValveGas Block26 www.sigsauer.com
when it counts 2.1.6.A. Position #1(Normal) is for normal operation.FIG 9 Gas Valve ON P12.1.6.B. Position #2(Adverse) is for adverse conditions such as fouling or short stroking.FIG 10 Gas Valve ON P2 AdverseCAUTION: The rifle should NOT be operated in Position #2 (Adverse) for an extended period of time. As soon as normalfunction returns, the gas valve should be rotated to Position #1 (Normal). Continued operation with the gas valve inPosition #2 (Adverse) will increase recoil and place unnecessary stress on the rifle. Having to operate the rifle in Position#2 (Adverse) is an indicator that the rifle needs maintenance.www.sigsauer.com 27
Page 1: when it counts ®OWNERS MANUAL: Han
Page 6 and 7: WARNING - LOCKING DEVICESThis firea
Page 8 and 9: TopicTABLE OF CONTENTSPageState by
Page 10 and 11: TopicPage6.0 Procedures in case of
Page 12 and 13: WARNINGS OF GREAT IMPORTANCEARE FOU
Page 14 and 15: GENERAL SAFETY INFORMATION AND MECH
Page 16 and 17: 1.1 Protect Your Eyes And EarsAlway
Page 19 and 20: when it counts 8. Do not oil cartri
Page 21 and 22: when it counts 2.0. Mechanical Char
Page 23 and 24: when it counts 2.1.4. Quad Rail Han
Page 25: when it counts MANUAL SAFETY “ON
Page 29 and 30: when it counts When the cycle of op
Page 31 and 32: when it counts To remove the butt s
Page 33 and 34: when it counts 2.1.8. Trigger Guard
Page 35 and 36: when it counts 2.1.9. SightsThe SIG
Page 37 and 38: when it counts CHANGES IN POINT OF
Page 39 and 40: when it counts 2.2. Technical Speci
Page 41 and 42: when it counts SEMI - The trigger i
Page 43: when it counts 3.2 Loading the Maga
Page 46 and 47: 3.5 Reloading the Rifle after firin
Page 48 and 49: 4.1. FiringRotate the fire control
Page 50 and 51: WARNING:Removing cartridges from th
Page 52 and 53: 6.2. Failure to Fire (Hot Rifle) Tr
Page 54 and 55: 6.4. Feedway Stoppage (Jam)A feedwa
Page 56 and 57: 1. Press the Pivot Pin (front pin)
Page 58 and 59: 7.3. Gas Valve and Pushrod Removal1
Page 60 and 61: 1. Remove the two (2) quad clamp sc
Page 62 and 63: 5. Remove the upper rail section.FI
Page 64 and 65: 8.0. Cleaning1. Your rifle is deliv
Page 66 and 67: 8.3. Cleaning the BoltA cotton patc
Page 68 and 69: 9.0 Reassembly9.1. Recoil Buffer an
Page 70 and 71: 9.2. Extractor1. Fit extractor to b
Page 72 and 73: 1. Re-insert the bolt into the bolt
Page 74 and 75: 9.4. Bolt Carrier Assembly to Upper
Page 76 and 77:
2. Place the upper rail section ove
Page 78 and 79:
9.7. Pushrod and Gas Valve re-assem
Page 80 and 81:
10.0. Perform a Function Check of t
Page 82 and 83:
Bolt and Carrier Assembly• Extrac
Page 84 and 85:
13.0. Service and Replacement Parts
Page 86 and 87:
Service PolicyIf you have questions
Page 88 and 89:
ORDER PARTSIn the event you want to
Page 90 and 91:
16.0 Parts Diagram*90 www.sigsauer.
Page 92 and 93:
SIG SAUER ® Limited Lifetime Firea
Page 94 and 95:
Notes:94 www.sigsauer.com
show all

owneRs manual: Handling & SafeTy inSTrucTionS - Sig Sauer

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?