PhD6 Multi-Gas Detector Reference Manual - Honeywell Analytics

Table of ContentsCERTIFICATION INFORMATION 4OPERATING TEMPERATURE AND HUMIDITY LIMITS 4SIGNAL WORDS 4WARNINGS AND CAUTIONS 41. DESCRIPTION 61.1 Methods of sampling 61.2 Multi-sensor capability 61.3 Calibration 61.4 Alarm logic 71.4.1 Atmospheric hazard alarms 71.4.2 Low battery alarms 71.4.3 Sensor over range alarms 71.4.4 PID lamp out alarm 71.4.5 LEL response failure due to lack of O2 alarm 71.4.6 Security beep/flash 71.4.7 Latching alarms 71.4.8 Fault detection 81.5 Other electronic safeguards 81.6 Sensors 81.7 Optional sample draw pump 81.7.1 Special precautions when using the PHD6 pump 81.8 Data storage 91.8.1 Black box data recorder 91.8.2 Event logger 91.9 PHD6 design components 91.10 PHD6 standard accessories 101.10.1 Alkaline PHD6 detectors 101.10.2 Li-Ion PHD6 detectors 101.11 PHD6 kits 101.11.1 PHD6 Confined Space Kits 101.11.2 PHD6 Value Packs 102. BASIC OPERATIONS 102.1 Turning the PHD6 On 102.1.1 Start up with pump 112.1.2 Start up with PID or IR sensor 112.2 Operating Logic 112.2.1 Status Bar 11Battery Status Icon 12Heartbeat Symbol 12Pump Status Icon 12Calibration and Bump Due Warnings 12Time 122.2.2 Screen Flip 122.3 Turning the PHD6 Off 122.4 Atmospheric Hazard Alarms 122.4.1 O2 Alarms 122.4.2 Combustible Gas Alarms 122.4.3 Toxic and VOC sensor alarms 122.4.4 Alarm Descriptions 13Warning Alarms 13Danger Alarms 13STEL Alarms 13TWA Alarms 132.5 Other Alarms 132.5.1 Missing Sensor Alarms 132.5.2 Sensor Overrange alarm 132.5.3 PID Lamp Out Alarm 132.5.4 O2 Too Low for LEL Alarms 132.5.5 Low Battery Alarms 142.5.6 Calibration Due Warning 142.5.7 Out of Temperature Range 142