12.07.2015 Views

MR HH325 VP - Cobra Electronics

MR HH325 VP - Cobra Electronics

MR HH325 VP - Cobra Electronics

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Intro Operation CustomerAssistanceVHF Installation Marine Radio ProtocolsInstallationIncluded in this PackageCustomerWarrantyAssistanceIncluded in this Package•Secondary IconsYou should find all of the following items in the package withyour <strong>Cobra</strong>Marine VHF radio:Radio Notice CautionWrist Strap WarningDrop-In Battery ChargerInstallationIntroductionMain IconsSecondary IconsInstall AntennaWrist StrapSecondary IconsIntro Operation CustomerAssistanceIntro Operation Customer CustomerInstallationAssistance AssistanceIntro Operation CustomerAssistance InstallationSecondary Notice IconsInstallationNoticeAntenna, Wrist Strapand Belt ClipCustomerAssistanceCautionNoticeWarrantyAntenna, Wrist Strap and Belt ClipCautionWarrantyAntenna InstallationThe flexible Warranty antenna is shipped separately in the packageCustomerand must beAssistanceattached before you use the radio.1. Caution Align the base Warningof the antenna with the socket in thetop of the radio.2. Screw it all the way into the socket. Be sure thatthe seal seats properly.WarningNOTICEOperating the radio without the antenna in placeWarningmay damage the unit. The radio is not waterproofuntil the antenna and battery pack are in placewith their seals properly seated.•Flexible AntennaBattery Charger Power CordNiMH Battery PackBelt Clip Secured to BeltWrist StrapThe radio comes with the wrist strap already attached.It can be easily removed if you choose not to use it.Operating Instruction ManualFor connection to 12-volt and 120-voltpower sources.Spring-Loaded Belt ClipInsert Knob onto Belt ClipBelt ClipUse the spring-loaded belt clip to carry the radio on yourperson.1. Press open the belt clip, slide it over the belt andrelease the clip.2. Insert the round guide on the back of the radio into theguide channel on the back of the belt clip. The radio mustbe upside-down, as shown, to remove it from the beltclip.3. Once the knob is inserted all the way into the belt clipchannel, the radio swings free but remains secure.Secure Radio30 EnglishNothing Comes Close to a <strong>Cobra</strong> ®31

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!