4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

Check motor oil leveleATTENTION:qCheck with cooled down engine only, or aftera shut down period of app. 3 to 5 min.Then remove oil dipstick (19/A), clean it and insert again intooil dipstick tube (19/A), then remove again and check oil levelon marker.ABRefill motor oilRemove motor oil filler cap (19/B) and add STEYR MOTORSTURBO DIESEL ENGINE OIL 5 W-50/10 W-40 or an equivalentmarked ACEA B4-02/E7, E4, E5 or with API Code CF up to specifiedmaximum marker on oil dipstick.1906005ATTENTION:qMotor oil must not exceed maximum marker.An overfilling results in high operatingtemperatures, foaming (air in oil), loss inefficiency and reduced engine life.Put on the motor oil filler cap.NOTE:Remove possible oil contaminations.The use motor oil with other quality thanspecified warranty canexpire.rOil level for Power SteeringtWhenever you check motor oil level, also check oil level ofpower steering. If required, add automatic transmission oil(available with your STEYR MOTORS Marine dealer). Otherapproved oils, such as GM Servo or Dexron II, may also beused. Do not overfill pump reservoir.Oil level for TransmissionzWhenever you check motor oil level, also check oil level oftransmission. If required, add automatic transmission oil(available with your STEYR MOTORS Marine dealer). Otherapproved oils, such as GM Servo or Dexron II, may also beused. Do not overfill transmission.2106006NOTE:Consider specifications of respectivetransmission manufacturer220600791