FlexPak 3000 Digital DC Drive Hardware ... - Reliance Electric

The information in this manual is subject to change without notice.Throughout this manual, the following notes are used to alert you to safety considerations:!ATTENTION: Identifies information about practices or circumstances that can lead to personalinjury or death, property damage, or economic loss.Important: Identifies information that is critical for successful application and understanding of the product.The thick black bar shown on the outside margin of this page will be used throughout this instruction manual tosignify new or revised text or figures.!ATTENTION: Only qualified electrical personnel familiar with the construction and operation ofthis equipment and the hazards involved should install, operate, or service this equipment. Readand understand this manual in its entirety before proceeding. Failure to observe this precautioncould result in severe bodily injury or loss of life.ATTENTION: 380/415 VAC-rated FlexPak drives can be configured for either 380 VAC or 415VAC input power. Before input power is applied to the drive, verify that the control transformertaps are set to match the input power. Follow the instructions provided in chapter 3 of this manualto set the control transformer taps. Failure to observe this precaution could result in damage to,or destruction of, the equipmentReliance, FlexPak, AutoMax, and E.S.P. are trademarks of Rockwell Automation.Trademarks not belonging to Rockwell Automation are property of their respective companies.©2004 Rockwell Automation. All rights reserved.