FlexPak 3000 Digital DC Drive Hardware ... - Reliance Electric

CHAPTER 1Introduction to the FlexPak 3000 DriveThe products described in this instruction manual are manufactured by RelianceElectric Industrial Company.1.1 Store the DriveAfter receipt inspection, repack the drive in its original shipping container until readyfor installation. To ensure satisfactory operation at startup and to maintain warrantycoverage, store the drive as follows:• In its original shipping container in a clean, dry, safe place.• In an ambient temperature that does not exceed 65°C (149°F) or go below -30°C(-22°F).• Within a relative humidity range of 5 to 95% without condensation.• Away from a corrosive atmosphere. In harsh environments, cover the shipping/storage container.• At an altitude of less than 3,000 meters (10,000 ft.) above sea level.1.2 Drive Identification NameplateThe FlexPak 3000 drive has a nameplate on the left side of the chassis that identifiesthe specific model number design, applicable AC input power and DC output powerdata. Refer to the sample nameplate in figure 1.1. All communication concerning thisproduct should refer to the appropriate model number information.Figure 1.1 – Sample FlexPak 3000 NameplatesIntroduction to the FlexPak 3000 Drive 1-1