Orex QC Workstation - Viztek

Onyx-RAD Orex QC WorkstationUser Manualimage, and choose “Close Study” from the menu that appears.Onyx-RAD Orex QC WorkstationUser ManualStep 9b : Send the Exam to Another Doctor☼ If you need toadd additionalrecipients, pleaserefer to Chapter 3– Configuration.If your QC Workstation has been set up to enable transmission ofstudies to other computers, you may wish to do so at this time. Toaccomplish this, find the patient’s entry in the listing of studies.Click the entry once to highlight it. Right-click (click the right mousebutton) on the study and choose “Send to” from the menu thatappears. A dialog window will appear with buttons for all therecipients set up in your system. Simply click the desired recipientand the study will be transmitted.2.3 Summary(the short, short version)1. Power up the Orex CR scanner (it may already be turnedon.)2. Start Onyx-RAD Orex QC Workstation.3. Log on to the database (if necessary.)4. Observe the Study Listing screen.5. Either click the “New Patient” button, or highlight an existingstudy and click the “New Study” button.6. Choose the body region being scanned.7. Insert the plate or cassette, click “Scan.”8. Wait for completion. Observe study listing screen again.9. Optionally open and view the study, and/or transmit thestudy to another colleague.Onyx-RAD is a trademark of Viztek, Inc. © 1999-2002 Page 15Onyx-RAD is a trademark of Viztek, Inc. © 1999-2002 Page 16