SIMOVERT Master Drives Einspeise-Einheit Bauform E Common ...

More documents

Recommendations

Info

02.96 Transport, unpacking, assembly2 Transport, unpacking, assembly2.1 Transport, unpackingThe units are packed at the manufacturing works in conformity with the order. A product packaging plate isattached to the box.Avoid extreme vibrations and hard impacts during transport, e.g. when lowering the unit.Pay attention to the notes on the packaging relating to transport, storage and proper handling.The converter can be installed after unpacking it and checking the consignment for completeness anddamage.The packaging consists of cardboard and corrugated cardboard. It may be disposed of in accordance withlocal cardboard disposal regulations.You should notify your freight forwarder immediately if you discover any transportation damage.2.2 StorageThe units must be stored in clean dry rooms. Temperatures between 25 °C (13 °F) and + 70 °C (158 °F) arepermissible. Temperature fluctuations > 20 K per hour are not permissible.Siemens AG 6SE7087-6AE85-0AA0 ENGLISH 2-1<strong>Common</strong> Rectifier Operating instructions
Transport, unpacking, assembly 02.962.3 Aids to assemblyThe following are required for securing: 4 M8 bolts dimension drawing (figure 2.2 for size E)WARNINGFor safe operation of the unit, it is presumed it will be assembled and commissioned byqualified personnel, paying attention to the warning notes given in these operatinginstructions.Particular note must be taken both of the general and national erection and safetyregulations regarding work on power installations (e.g. VDE) and regulations regarding theproper use of tools and of personal protective equipment.Non-observance of warning notices can result in death, severe personal injury orconsiderable property damage.The unit must be protected against the ingress of foreign matter as otherwise properfunctioning and safety will not be guaranteed.Requirements for the installation siteLocal guidelines and standards must be observed in relation to assembly.Operating facilities must be dry and dust-free. Air fed in must not containany gases, vapours or dusts that are electrically conductive or detrimentalto functioning. Air containing dust must be filtered.DissipatedpowerWARNINGDimension cabinet ventilation according to thedissipated power! (Technical data in Chapter 14)The unit’s ambient climate in operating rooms must not exceed the valuesof code 3K3 as detailed in DIN IEC 721 Part 3-3 /04.90. A reduction ofpower as detailed in Chapters 14.1 and 14.2 is necessary in the event oftemperatures > 40 °C (104 °F) and altitudes >1000m. The terminalvoltage has to be reduced for altitudes > 2000m.Carry out assembly in accordance with the dimension drawing inChapter 2.4.6SE70Cooling air≤ 40 °C (50 °C)Figure 2.1 Installation in control cabinets2-2 ENGLISH Siemens AG 6SE7087-6AE85-0AA0<strong>Common</strong> Rectifier Operating instructions
Page 1: SIMOVERT Master DrivesEinspeise-Ein
Page 4 and 5: 02.96 ContentsContentsENGLISH0 Defi
Page 6 and 7: 10.94 Definitions0 DefinitionsQUALI
Page 8 and 9: 10.94 DefinitionsWARNINGWhen operat
Page 10 and 11: 02.96 Description1 Description1.1 A
Page 14 and 15: 02.96 Transport, unpacking, assembl
Page 16 and 17: 02.96 Connection3 ConnectionWARNING
Page 18 and 19: 02.96 ConnectionUnit order No.Mains
Page 20 and 21: 02.96 Connection3.2.1 Electronic po
Page 22 and 23: 02.96 Connection3.3 Control termina
Page 24 and 25: 02.96 Connection3.5 Single-line dia
Page 26 and 27: 02.96 ConnectionArrangement of thyr
Page 30 and 31: 02.96 ConnectionTermal sensoron the
Page 32 and 33: 02.96 ConnectionϑR100X30-1X30-2E1M
Page 36 and 37: 02.96 Start-up4 Start-upWARNINGThe
Page 38 and 39: 02.96 Start-upRated ac-side voltage
Page 40 and 41: 02.96 Malfunctions and warnings7 Ma
Page 42 and 43: 02.96 Maintenance8 MaintenanceWARNI
Page 44 and 45: 02.96 MaintenanceReplacing modules
Page 46 and 47: 02.96 Options9 Options9.1 A50 addit
Page 48 and 49: 02.96 Options9.3 Power SupplyA SITO
Page 50 and 51: 02.96 Spare parts10 Spare partsFor
Page 52 and 53: 02.96 Environmental compatibility13
Page 54 and 55: 02.96 Technical data14 Technical da
Page 56 and 57: 02.96 Technical dataCommonrectifier
Page 58 and 59: 02.96 Technical data14.1 Power redu
Page 60 and 61: 02.96 Technical dataSourcesDIN stan
Page 62 and 63:
11.94 Index15 Indexin preparationSi
Page 64:
02.96Bisher sind folgende Ausgaben
show all

SIMOVERT Master Drives Einspeise-Einheit Bauform E Common ...

Create successful ePaper yourself

Delete template?

Save as template?