SIMOVERT Master Drives Einspeise-Einheit Bauform E Common ...

Connection 02.96Unit order No. Rated input- Commutation choke 2 %voltage current Type Voltage / Frequency Rated current6SE70 (V) (A) (V / Hz) (V / Hz) (A)31-7EE85-0AA0 380 bis 460 149 4EU2451-2UA00 400 / 50 460 / 60 16032-7EE85-0AA0 380 bis 460 233 4EU2551-5UA00 400 / 50 460 / 60 25033-8EE85-0AA0 380 bis 460 326 4EU2751-7UA00 400 / 50 460 / 60 31534-6EE85-0AA0 380 bis 460 403 4EU2751-8UA00 400 / 50 460 / 60 40036-1EE85-0AA0 380 bis 460 526 4EU3051-5UA00 400 / 50 460 / 60 56031-4FE85-0AA0 500 bis 575 123 4EU2451-1UA00 500 / 50 14032-4FE85-0AA0 500 bis 575 203 4EU2551-6UA00 500 / 50 20033-5FE85-0AA0 500 bis 690 307 4EU3051-3UA00 690 / 50 31534-2FE85-0AA0 500 bis 690 366 4EU3051-4UA00 690 / 50 40035-4FE85-0AA0 500 bis 690 465 4EU3651-5UA00 690 / 50 50032-2HE85-0AA0 660 bis 690 193 4EU2751-6UA00 690 / 50 22433-5HE85-0AA0 500 bis 690 307 4EU3051-3UA00 690 / 50 31534-2HE85-0AA0 500 bis 690 366 4EU3051-4UA00 690 / 50 40035-4HE85-0AA0 500 bis 690 465 4EU3651-5UA00 690 / 50 500Table 3.3Recommended commutation choke3.2 Power supply / controlWARNINGWhere the unit is operated in conjunction with a power system, one phase of which isearthed and not the starpoint, the plant management must ensure that power supply tothe fan circuit (terminals X19-1, X19-2) and to the main contactor circuit (terminal X9-4,X9-5) is taken from this phase and the starpoint.Where this cannot be ensured, the power supply to the fan circuit, to the main contactorcircuit and to the signalling circuit must be taken via an isolating transformer.In addition, the power supply to terminals X19-1, X19-2, X9-4, X9-5, X36-1, X36-2 mustbe taken via an isolating transformer, when: the connection to ground - electronic ground is interrupted (refer to Chapter 3.2.3"Settings on the module A23"),the power supply unit is operated in conjunction with a non-grounded power supplysystem.3-4 ENGLISH Siemens AG 6SE7087-6AE85-0AA0Common Rectifier Operating instructions