Isokern Chimney Systems Product Brochure

Firechests and GathersManor FirechestsCode8012080036800428004882048ModelManor 500Manor 950Manor 1100Manor 1200Manor 1250Opening Width510mm940mm1080mm1200mm1250mmOpening Height540mm810mm810mm810mm960mmExternal Width685mm1090mm1230mm1350mm1346mmExternal Height1540mm1795mm1995mm1795mm1761mmExternal Depth440mm640mm640mm640mm710mmFlue Size225mm300mm350mm350mm350mmManor GathersCode850368504285048Internal Width940mm1080mm1200mmExternal Width1090mm1230mm1350mmExternal Height910mm1110mm910mmExternal Depth640mm640mm640mmFlue Size300mm350mm350mmStove RecessCode88036Opening Width940mmOpening Height1080mmExternal Width1090mmExternal Height1585mmExternal Depth640mmStandard FirechestCode85022Internal Width690mmExternal Width850mmHeight660mmExternal Depth450mmFlue Size225mmStandard Liner GatherCode85020Internal Width690mmExternal Width850mmHeight600mmExternal Depth450mmFlue Size225mmDM44 GatherCode85021Internal Width690mmExternal Width850mmHeight600mmExternal Depth450mmFlue Size225mmConcrete GathersCodeC15C17Internal Width600mm800mmExternal Width800mm1000mmHeight225mm300mmExternal Depth450mm550mmFlue Size200mm250mmFlue SizingEach firechest has been tested to establish the optimum flue sizerequired to give best possible performance. The recommendedflue sizes are shown in the range table. The minimum flue heightrequired is 4.5m above the fireplace opening.Regulations and RequirementsCurrent building regulations require 100mm of solid non-combustiblemasonry to be built around the sides and back of the firechest.An adequate combustion air supply must be provided in accordancewith our instructions or document J of the building regulations.The inside of the firechest should be lined with firebrick slips.Schiedel Isokern supply buff coloured firebricks. The finishedfireplace opening size will be reduced when the bricks are installed.15