Ultima - 3 in 1 Combination instructions - Mamas & Papas

SPECIAL FEATURENot all models are supplied with or use this special feature.For more information please consult your retailer.FITTING THE TWO PART PVC RAINCOVER TO THE CARRYCOTImportant: Not all carrycots come with a two part PVC raincover.Check with your retailer for more information.To attach the PVC hood cover,fasten the inner zip on it tothe zip running around thefront of the fabric hood.Next, gently pull the PVChood cover down over thefabric hood until all of thehood is covered.Attach the zip on the frontsection to the outer zip onthe PVC hood cover. Once thetwo PVC sections have beenzipped together gently foldthe front section down overthe front of the carrycot andfasten the press studs on thesides to those on the PVChood cover.Opening the front section ofthe hood.When you take the pushchairindoors, even fora short time, unzip the frontsection of the PVC raincoverand fold down over the frontof the carrycot, this preventsyour child from becomingoverheatedFOLDING THE CHASSIS WITH THE PVC RAINCOVER ATTACHEDBefore folding the chassis, undo all of the press studs and fold the front sectionof the PVC up onto the top of the carrycots hood. The pushchair can now befolded following the instructions given in these instructions. Always take carewhen folding the chassis with the PVC raincover fitted, check that the chassis isnot trapping or damaging any section of the PVC.NEVER FORCE THE CHASSIS TO FOLD.– 10 –